Ethylene bis-stearamide powder provider with sainuowax.com? The Sainuo plant was put into production in 2010, expanding from the initial one to the current three plants. At present, it has formed an international production of 30,000 tons of production capacity of polyethylene wax lubricating dispersant. The company has more than 100 employees, Upon technical support of professional polymer ,materials institutes of Qingdao University and Qingdao University of Science and Technology, and has a number of senior professional technical personnel and professional application laboratory, with strong independent R&D ability. Read extra info at https://www.sainuowax.com/nn-ethylene-bis-stearamide.html.
Its performance is comparable to the US Honeywell AC wax. It can improve the production efficiency of plastic processing, reduce the production cost, has good compatibility with polyolefin resin, etc. Oxidized PE wax has good moisture resistance at normal temperature, strong chemical resistance, excellent electrical properties, and can improve the appearance of finished products. Oxidised polyethylene wax can replace the products of Mengdan wax, Sichuan wax, liquid paraffin, microcrystalline paraffin, natural paraffin and polyethylene wax, etc, and its performance is comparable to that of the Honeywell A-C wax.
Stearoyl benzoyl methane is with the features of small smell, white color, high purity, product uniformity, stable for a long time, good weather resistance, no pollution. As a co-stabilizer of calcium / zinc hydroxy acid salt stabilization system, stearoyl benzoyl methane is used in the manufacture of mineral water bottles, oil drums, transparent sheets and transparent films; PVC heat stabilizer. This product is white powder, it is slippery, non-toxic, insoluble in water. It is used as a non-toxic heat stabilizer for polyvinyl chloride. It has low initial coloring property, good weather resistance, and excellent lubricity. It can be used as a lubricant, mold release agent, flat agent, etc. Find additional information on https://www.sainuowax.com/.
Plastic additives can generally be divided into two categories. Namely: process additives and functional additives. The main function of the former is to help the smooth implementation of the processing process and improve the smoothness of process operation. Such additives include antioxidant, lubricant, coupling agent, release agent, etc; The latter can endow or improve the specific application performance of products. Representative additives include plasticizer, light stabilizer, UV absorber, antistatic agent, flame retardant, nucleating agent, antibacterial agent, etc.
Use of internal and external lubricants: The amount of lubricant added to a system should enable the material to obtain uniform plasticization and sufficient fluidity under normal operating conditions. If the adjusted amount of external lubricant still cannot meet the requirements of material processing, a small amount of internal lubricant can be considered. There are many factors affecting the external lubricant. When using high surface active fillers, such as ultrafine calcium carbonate and active calcium, the amount of external lubricant needs to be increased due to their absorption and adsorption to the lubricant. When using impact toughening modifier, the possibility of adhering to the metal surface is large due to the high melt viscosity, so it is often necessary to increase the amount of external lubricant.