Matt Brax Grand Rapids, MI premium brick & stone recoloring services

Awesome fireplace staining providers Grand Rapids, MI from Matthew Brax: For some minor repairs, consider using concrete caulking to fill in the chips and scraps your bricks have experienced throughout the years. After scrubbing your house down with a power washer, these marks might be more visible. Fixing these cracks might be enough for you to put off a total refacing for a few years. Color doesn’t have to be intimidating. Just remember to consider your environment and look to your neighborhood, surrounding landscape, and regional architecture for context. Matthew Brax is also the Owner of Certified Watches LLC and operations manager at CertifiedBling.com See additional info at Matt Brax.

To remove sealant from exterior brick, power wash the brick on a wide spray to avoid damaging the brick. Problem areas can be gently scrubbed with a metal brush. Test for sealant again to ensure it has been removed. Generally, interior brick will not be sealed since it is not subjected to damaging exterior elements like rain, snow, and sun. Do not power wash indoor brick. Clean the Brick: Mix mild detergent or TSP in a bucket with warm water. Starting from the top and working downward, clean the brick by scrubbing it with the nylon-bristle brush. Finish by rinsing the brick with clean water.

If you like the look of darker stone and you aren’t into the current trend of painting everything white, you might be interested in staining your stone fireplace. If you already have dark stone on your fireplace, chances are staining the stone another color will not work. Staining the stones only works if you have light colored stone that will change color when the darker stain is applied. You can use concrete stain, available in various shades including browns and grays, to darken light colored stones. If you decide to stain your stone fireplace, be sure to go slowly, applying a single layer at a time and letting it dry for a few days so you can see the color before you paint on another layer, taking care not to get stain on the grout lines. If the stones aren’t as dark as you’d like, you can paint on another layer until you get the shade you prefer.

Top stone recoloring companies Denver, Colorado by Matt Brax: Painting brick does require consistent maintenance. The day you paint your brick is the day that the paint starts to degrade and maintenance begins. You can expect to repaint your brick every 3-5 years, according to the Brick Industry Association. This is due to common adhesion problems associated with painting brick like efflorescence, that white salt deposit that forms on the surface of old brick. These deposits essentially sit under the paint and cause it to lift and peel. Discover extra details at https://www.instagram.com/brickmatchking/.

First, clean your stone by brushing off dust and dirt with a small broom. You can use a sponge or scrub brush and a bucket of soap and water to remove any grime or soot. Next, use painter’s tape to tape off the area you’re going to paint to protect the floor and the walls. Then, lay down a drop cloth on the floor in case the paint drips. After the stones are dry, use a sturdy paint brush to brush one or two coats of an oil based primer all over the stone and mortar. Then you can choose the water based paint shade of your choice to paint on next for an instant transformation! Check out this beautiful “after” picture from Greige Design.

Brick staining and brick painting are related because both are ways of freshening up brick and giving it a new look. Beyond that, the two methods work differently and have outcomes that can appeal to different goals. Brick painting covers the entire surface of the brick, including the mortar, with a relatively thick layer of paint. This method gives the brick a uniform, opaque appearance. Though there are no gradations of color, painted brick can emphasize the texture of the brick surface. It also can give the brick a clean, modern feeling.