Ethylene bis-stearamide powder manufacturer in China? Products have passed the REACH, ROHS, PAHS, FDA testing, are widely used in PVC products, PVC stabilizer, color masterbatch, filler masterbatch, hot melt adhesive, modified asphalt, engineering plastics, powder coating, road marking paint, polymer modification and other fields, It has become an important raw material supplier to Vietnam, Malaysia, Indonesia, France, Japan, South Korea and other countries, and its brand influence spreads all over the world. Read more info at ethylene bis-stearamide.
Polyethylene wax (PE wax), also known as polymer wax, because of its excellent cold resistance, heat resistance, chemical resistance and wear resistance. It is widely used in the production of color masterbatch, filler masterbatch, PVC products, hot melt adhesive, road marking paint, stabilizer, asphalt modification, coating powder and wax emulsions, etc. In normal production, this part of wax can be directly added to polyolefin processing as an additive, which can increase the luster and processing performance of products. As a lubricant, it has stable chemical properties and good electrical properties.
Ethylene bis-stearamide is a hard and brittle white high melting point wax. Its industrial products are slightly yellow particles or white powder, non-toxic, and have no side effects on the human body. Substitute Malay and Indonesian products, partly substitute kao ES-FF products, low acid value, low amine value, high performance, high purity, excellent heat resistance and stability. If you are looking for professional & reliable ethylene bis stearamide suppliers, Sainuo will be your perfect choice. We have been focusing on nn ethylene bis stearamide for more than 15 years. Welcome to contact us for further details. Discover additional details on https://www.sainuowax.com/.
Colorants are the main components of color masterbatch. They provide all the required colors and characteristics. Inorganic pigments: black and white pigments represented by titanium dioxide and carbon black; Iron oxide, metal oxide mixed crystal series, ultramarine, metal sulfide, etc; Organic pigments: azo series, phthalocyanine series, heterocyclic (fused ring) series, etc; Organic dyes: solvent dyes, disperse dyes (part), vat dyes (part); Effect pigments: Mica (pearlescent) pigment, copper gold powder, aluminum silver powder (slurry).
Use of internal and external lubricants: The amount of lubricant added to a system should enable the material to obtain uniform plasticization and sufficient fluidity under normal operating conditions. If the adjusted amount of external lubricant still cannot meet the requirements of material processing, a small amount of internal lubricant can be considered. There are many factors affecting the external lubricant. When using high surface active fillers, such as ultrafine calcium carbonate and active calcium, the amount of external lubricant needs to be increased due to their absorption and adsorption to the lubricant. When using impact toughening modifier, the possibility of adhering to the metal surface is large due to the high melt viscosity, so it is often necessary to increase the amount of external lubricant.